Gunite Pool Surface Damage in Rye, NH Gunite pool surface damage in Rye, NH can show up as rough areas, stains, exposed aggregate, hollow spots, patches, or cracks. Several symptoms can look similar from the deck. Record what is visible, but do not label every surface line as structural damage or assume every stain requires resurfacing.
A useful inspection separates the finish from the shell, fittings, tile, coping, and deck edge. The owner record should show where each symptom appears and how it changed. The contractor can then connect a recommended task to evidence from the site instead of relying on a broad service label.
Affordable Pools is based in Hudson, New Hampshire, and serves pool owners across New England. The company has 25 years of experience. Written project terms, site conditions, product instructions, and local requirements control each job.
Map the Gunite Pool Surface in Rye, NH
Divide the pool into walls, floor, steps, benches, fittings, and transitions. Mark roughness, stains, cracks, exposed areas, and old patches on a sketch. Take wide and close photos under similar light. Add the date and current water level to the file.
Separate Finish Wear From Shell Questions
A worn finish and a shell concern are different scope questions. Ask the site review to describe the depth, pattern, and surrounding condition before recommending work. Photos can document the surface, but draining or qualified testing may be needed to understand concealed conditions.
Review Cracks by Pattern and Location
Record each crack's direction, endpoints, width if it can be measured safely, and connection to steps, fittings, tile, or prior repairs. Do not fill or widen the crack for inspection. The proposal should explain which visible finding supports the recommended repair area.
Compare Stains, Roughness, and Prior Patches
Note stain color and location, the result of normal cleaning, and whether roughness is local or widespread. Collect dates and product records for earlier patches when available. These details help separate a cleaning question, a local repair, and broader finish work.
Define Surface Preparation in Writing
The work description should state what will be removed, what remains, how damaged areas are handled, and how the prepared surface is accepted. Preparation can change after the pool is drained or material is removed, so the scope also needs a written change process.
Coordinate Tile, Coping, Fittings, and Drains
Check every component that meets the pool surface. The proposal should name included work at lights, returns, drains, steps, tile, coping, and joints. This prevents an important transition from falling between a resurfacing line item and a separate repair.
Plan the Finish Handoff and Final Review
Write down who handles filling, startup directions, care records, equipment settings, and the final walkthrough. Compare the finished pool with the approved selection and work boundary. Save closeout photos and unresolved items in one Rye project file.
Bring the gunite pool surface damage Rye NH record to the site review. Ask the written scope to connect every task to a visible finding, an approved selection, or a documented condition found during the work. Keep required repairs separate from optional changes. Save each approval, selection, photo, care note, and open item with the final project file.
Review pool repair and renovation planning and contact Affordable Pools before approving the next step.