Pool plastering versus resurfacing in Hudson, NH is often a question of scope. Plaster is one type of pool finish. Resurfacing is the full task of taking off or treating an old finish and adding a new one. A bid may use either term. The work list and finish name tell you what the pool company will do.
Pool plastering versus resurfacing in Hudson, NH
Plaster work can mean a new plaster coat after the old pool face is made ready. New finish work may use plaster, quartz, pebble, or another pool finish. The words can vary from one bid to the next. Ask for the exact product and each step in plain terms.
Both types of work need a firm base. Cracks, leaks, hollow spots, and loose old finish need a check first. New material can cover a flaw for a time. It cannot stop shell move or fix a leak on its own.
Look for signs of worn pool plaster
Run a hand over steps and bench tops when it is safe. Note rough spots, sharp pits, flakes, stains, and bare areas. Take wide photos to show where each mark sits. Then take close photos that show the face of the finish.
Color change alone may not call for a new finish. Pool care, age, and water balance can change the look. A hands-on site check can sort a clean-up need from worn material. Track water loss as a separate issue.
Ask how the old surface will be prepared
The bid should state what crews will chip, grind, wash, or take off. It should also state how they will find loose areas. Ask what happens if crews find a crack after the old finish is gone. The answer should include a review and signoff step.
Tile, coping, drains, lights, and wall parts may need care too. Do not assume they are part of a finish bid. Each item should have its own line when it is in the work. This makes bids much easier to check.
Choose a finish by feel and care needs
Ask to see real finish samples. Dry chips and screen photos can look unlike a filled pool. Feel the sample and ask how it may feel on steps or a bench. Color, grain, and light can change the final look.
Ask for the maker’s care notes before you choose. Some finishes need close water care during start-up. The bid should name who will fill the pool, test the water, brush the finish, and keep the first care log.
Plan for New Hampshire weather
Hudson pools go through cold winters and warm swim months. Water in an open gap can freeze and make damage worse. Check tile, coping, joints, and deck drains before the pool closes. Check the same spots again when it opens.
Winter weather may add stress, yet it may not be the first cause. Keep photos from each season. A simple date and note can show if a gap grew. That record gives the pool team better facts for the site visit.
Compare the written scope
Ask each pool company for the finish name, prep steps, repair limits, fill plan, and start-up duties. Review Affordable Pools’ pool refinishing services. Then contact Affordable Pools with your photos and notes. The company is based in Hudson, New Hampshire, and serves New England.